How to Set up iPad enrolled in Mosyle

Owned by Rashell Mehring, created
Last updated: Jan 12, 2023
2 min read

Text directions (visual supports are located in the next section):

  1. Power on the device (power button is located on the top right corner of the device if the charging port is on the bottom)

  2. Press the Home Button to start the setup process

  3. Select the appropriate language

  4. Select the appropriate country or region

  5. On the Quick Start screen, tap Set Up Manually

  6. Connect to a network (if you are at an SSD site use SSD_Secured and you may receive a security request - tap on Trust in the top, right corner)

  7. On the Remote Management screen tap Next (it may take a few minutes for the device to go through management configuration)

  8. Tap to enable Location Services (this allows us to locate the device if it is missing/lost - if the device freezes on this screen do a hard reset by holding the power button and Home button down at the same time until a white Apple icon appears on the screen)

  9. Select the desired screen appearance, tap Continue

  10. The Mosyle Manager app should auto-install on the home screen (if it does not appear please contact Tech Services by submitting a tech support ticket at jira.ssdmo.org)

  11. If you receive a Bluetooth request - do not allow (it's ok if you allow)

  12. If you receive a location request- Allow while using the App (it's ok if you select a different option)

  13. Notify Technology Services (by replying to your open ticket or creating a new ticket) that this process is complete so the device can be put in the appropriate group. When the device is put in the appropriate group, no activation code is needed.

  14. You can access apps that are deployed to all devices by tapping on the Self-Service button in the bottom right corner of the Manager app.

Step-by-step video